Category: Radio
-
STM32 F1 and F3 versus LRS 433MHz interference issue
This topic first appeared on my table few weeks ago. Can a flight controller interfere with long range system running on 433MHz band like openLRSng? STM32 F1 and F3 based CPU running most flight controllers (Naze32, SPracingF3, Flip32, CC3D, etc.) run on 72MHz. Actually this is 8MHz of external clock and 9 multiplier. But still,…
-
FrSky X12S Horus spotted in the wild
Last weekend I had a brief opportunity to take a look at new radio from FrSky: X12S Horus. One thing is sure, this thing is quite impressive. For me it is slightly too big and too expensive. Plain old Taranis suits all my needs. Owner seems too be quite happy with his X12S Horus, and…
-
DIY wireless telemetry link for UAV
Telemetry link between UAV (drone, airplane, boat) and laptop/mobile/ground station device can be very useful. Not only to get current drone position, altitude or battery level, but also, when wireless link provides such a possibility, to update drone parameters in-flight. Some radio links, like OpenLRS provides such a possibility out of the box. They include…
-
Generate PPM signal with Arduino
In the beginning of this year I’ve written a short tutorial how to read PWM signals from RC radio with Arduino. While it is can be useful when building own RC equipment, it does not help much when one has to deal with PPM (CPPM) signal. Let’s be honest, PPM is much more useful than…
-
HC-12 433MHz RF serial module range test
As I mentioned in my first post about HC-12 433MHz radio modules, I’ve put my interest in them for telemetry purposes. While S.Port telemetry I’m using in FrSky Taranis radio might have higher range than HC-12, it is closed environment. Since $10 for a pair of HC-12 is not much, I’ve decided for more open…
-
HC-12 433MHz wireless serial communication module configuration
Description HC-12 are cheap 433MHz wireless serial port communication modules with a range up to 1800m in open space. They are SI4463 based. Each costs about $5 when bought from China, and 2 of them can create wireless UART link that can be used, for example, to transfer telemetry data from UAV. Or drive IoT…
-
Improving cheap radio range
Radio range of my first drone, UDI 829A was pretty pathetic. OK, it was (still is, I only have to finally replace motors) pretty indestructible, quite stable and reasonably priced. But effective radio range as quite short. More less 50 meters. Above that limit strange things started to happen. The reason was pretty simple. Just…
-
10 channels for FlySky FS-i6 radios
This news might be not super fresh, but somehow it missed my attention. There is a good news for all owners of FlySky FS-i6 radios: there is an unofficial firmware that turns this cheap 6 channel radio into 10 channel one. Of course, there is a small catch, or even a few of them: All…
-
VirtualWire support for Raspberry Pi
FS1000A and XY-MK-5V 433MHz RF modules are very often first choice for cheap and dirty Do It Yourself wireless communication. Pair of those , allowing one way radio communication, const less than 3 dollars or euros. So they are really cheap. Limited range and transmission speed limits their real life usage, but simple assembly and…