-
5.8GHz FPV channel frequency table
For 5.8GHz FPV systems, there are 5 main bands divided into 8 channels each. That gives 40 channels free to use. So, in theory, 40 pilots should be able to fly FPV at the same time. Unfortunately, this is not true. First of all, there are transmitters, and there are transmitters. Better, properly tuned, will…
-
Flash firmare to S.Port FrSky receivers with X9D Taranis
FrSky X9D is an excellent radio. There is a variety of receivers that can work with it. And each of receivers is a small computer itself. With its own firmware that can be changed. Why? For example to enable CPPM mode, or allow receiver to bind with EU or non-EU Taranis (I will write on both…
-
Quick Review: EMAX GT2218/08 1100KV motors
Since I was lacking some power in my Reptile 500 quadcopter, I was considering switching my Turnigy MT2213 935KV motors to something more powerful. Last previous weekend kind of forced me to make that switch: I destroyed one motor while trying to replace bearings. Being forced with lack of motors I’ve decided to stay with…
-
How to add external compass to Flip32
In my last post I’ve showed how to disable internal MHC5883L compass on Flip32+ (10DOF) flight controller board. Now it’s time to fix what we’ve broken last time, and connect external MHC5883L compass with I2C bus. In my case I used very popular setup: u-blox NEO-6M GPS module with integrated MHC5883L compass. So you have…
-
How to disable compass on Flip32+
Build in HMC5883L compass/magnetometer is very nice feature of Flip32+ flight controller. Too bad it’s not always working like expected and there is a time, when one have to replace it by external device, positioned as far away from power cables as possible. I’ve encountered that specific problem two weeks ago when I’ve discovered the…
-
How to flash MW OSD to Micro MinimOSD
While playing with newly arrived Micro MinimOSD and attempting to flash it with latest MW OSD software, I’ve discovered that offical tutorial, as well as many other are missing one tiny detail that makes whole process much harder than expected. In theory, MinimOSD just Arduino Pro Mini with additional hardware. So, in theory, you plug in…
-
Fix buzzer on Flip32
Buying cheap from China is like a lottery. Sometimes everything is fine, sometimes is not. For example, I will never again buy super motors and pellers. This just does not work. With electronics it is slightly better. Usually it works. But sometimes, well, it does not. And this might be a case for Flip32+ multirotor flight…
-
Let’s build a FPV drone: motors and electronics
My 250 class quadcopter project is slowly coming to a successful (hopefully) end. Finally had some time to assemble motors and ESC. Since I wanted to have rather standard setup with 5×3 propellers, I had no super high demand on ESC, I’ve decided to use Turnigy Multistar 10A V2 ESC preflashed with BLHeli software available at Hobby King.…
-
Let’s build a FPV drone: frame assembly
Yesterday I finaly had some time to work on my 250 class quadcopter based on ZMR250 carbon fiber frame. There was a plan to finish it before weekend, but looks like plan will have to be changed. I’m missing motor screws. They were not with frame nor motors. Too bad… After one evening of work…