Category: Telemetry
-
FrSky SmartPort Telemetry on AnyFC F7
STM32F7 CPU family present in newest, experimental, flight controllers like AnyFC F7 (as well as upcoming AnyFC M7 with smaller STM32F722) simplifies many things. For example, comparing to F4 boards, SmartPort or S.Bus connection is extremely simple and can be done on any free UART. No more hardware hacks, external inverters and other “special” ways…
-
Talking Taranis – teach FrSky Taranis to talk to you
One of the most important features of modern, computerized, radios is that you can make them talk to you. After all, with setup telemetry link from UAV, radio should “know” things. Things like battery voltage for example. Why not make FrSky Taranis (or Horus or Taranis X Q7) talk to you and report LiPo voltage…
-
3D Printed HC-12 and HC-06 telemetry relay box
It’s a very nice feeling when people starts to create accessories for your inventions. OK, maybe “invention” is too strong word here, but still. EduardoChamorro designed a 3D printed case for my HC-12 433MHz to HC-06 Bluetooth bridge that I published here last year. It’s small, it has a switch and status LED. It also…
-
Hardware SmartPort Inverter using BC547 bipolar transistors
This post is only a short update for SmartPort inverter for F4 flight controllers. Here is alternative SmartPort inverter circuit using bipolar BC547 instead of unipolar 2N7000. All other aspects of operations are the same like in MOSFET version.
-
3D Printed 433MHz Moxon Antenna With Arm And Snap Mount
It’s still middle of winter here in northern hemisphere, but I’m slowly preparing for next flying season. One of my goals is to push my DIY HC-12 Telelemetry System to a next level. In both range and quality. For quality I’m planning small hardware LTM decoder with LCD. For range, I want to reach at…
-
SmartPort inverter for F4 flight controllers
While STM32F4 family processors installed in newest flight controllers are superior to STM32F3 (and F1 of course) in terms of raw speed, they are inferior to F3 family in terms of IO handling capabilities. For example, F4 family is not equipped with UART port inverters. There is an S.BUS inverter, but not a SmartPort inverter.…
-
Simplest hardware inverter for flight controller
Together with increasing popularity of STM32F4 flight controllers, telemetry became hard topic again. Why? Most popular telemetry protocols, SmartPort and FrSky telemetry , requires inverted signal. Zero becomes one, one becomes zero. In case on STM32F3 that was not a big problem. Those CPUs have built in inverters. STM32F1 and STM32F4 does not. So, if…
-
INAV 1.1 for Naze32 with working telemetry
As long as Naze32 / Flip32 are decent flight controllers for those who does not demand too much, they share very big flaw: low flash memory size. While even a year ago 128kB of flash was enough, times changed, and limited flash makes a problem for advanced flight controller software like INAV. Starting from INAV…
-
850m for $20
Short update on my DIY telemetry link for $20 from my previous post. In theory, it should be able to work up to 500m. Today I archived range of 850m. And I’m pretty sure it’s not the end if I was flying higher. At this distance signal was attenuated by 1st Fresnel zone. Next time,…